• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving it using the original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN has to be entered to begin the engine.

Ghost, unlike trackers, does not emit radio frequency signals and can't be identified by diagnostic tools. There are also no LED indicators or buttons that can give the impression of its presence in your van or car.

Anti-key cloning

The Ghost immobiliser was created to combat key cloning. The device connects to the CAN data network of your vehicle and creates an unique pin code push sequence by using the buttons that are factory-installed on your dashboard and steering wheel. This stops the thief from being able to start your vehicle. If the wrong PIN code is entered, your engine will not be started which makes it impossible for them to escape with your joy and pride.

A ghost immobiliser uses new technology that is extremely difficult for thieves to defeat. The ghost immobiliser, unlike physical deterrents such as wheel locks and steering locks that can be cut, is a discreet electronic device. It isn't detected by thieves because it does not emit radio signals and is operated in a silent manner.

The next-generation immobiliser protects your car against a variety of threats, including key hacking relay attacks, key hacking and duplicate copies. It also has the ability to stop the thief from adding a new key or replacing your ECU, as it will not allow the car to start without entering the correct PIN number first.

The ghost immobiliser 2 unlike other immobilisers does not require the use of a remote control or key fob to operate. It can be deactivated through an app on the driver's smartphone. This makes it perfect for the times you need to hand your car over to valet parking or maintenance without keys.

The Autowatch Ghost Installation Birmingham (Https://Mcwilliams-Suhr.Mdwrite.Net/10-Healthy-Ghost-Ii-Immobiliser-Habits/) bmw x5 ghost installer-II represents the latest version of the Ghost's immobiliser. It is designed to be easy and convenient to use, while still being as secure as is possible. This is accomplished by integrating the Ghost-II into the vehicle's data network CAN, which means there aren't any additional wires to hide or be easily located. It also features an integrated feature that allows you to disarm your Ghost-II by simply connecting to the vehicle's Bluetooth, so you can get in and drive, with no hassle.

OBD port hacking

OBD port hacking is a new technique being used by professional car thieves to steal cars. Thieves are able to access your vehicle's OBD by using an laptop, mobile application, and cables that are available on the internet for less than PS50. Once they have access to your vehicle's OBD port, they will be able to do whatever they want from setting fault codes, and tuning your car to taking away your pride and joy in under a minute.

It can protect your vehicle from being stolen by requiring a specific PIN sequence to be entered along with your key fob before you can start the engine or drive away. It does this by interacting with the vehicles ECU (Engine Control Unit) on the CAN Data circuit, and is completely undetectable to any code grabbing or RF scanning technology. It also has a Service/Valet Mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device you need to have an operating system that is capable of interpreting the OBD protocol. This is available for less than PS100 on eBay or Amazon. You'll also require a cable with OBD pins that are connected to the CAN Bus. These cables are available on Amazon/Ebay around PS50. The next step is to connect the cable into the wire harness of your vehicle for example, the radio wiring harness.

Once the hacker has gained a connection to your vehicle's OBD port, they will send diagnostics to the system at high baud rates that can crash the CAN, and prevent systems within your vehicle from functioning. This can cause your car's engine to stall or even shut down.

There is no need for additional remotes or key fobs

The car immobiliser is an excellent piece of anti-theft technology used by billions modern vehicles across the globe. Utilizing engine ECU software to stop cars from starting if a fake transponder signal is transmitted to it an aftermarket immobiliser can be an excellent method of protecting your vehicle.

It is possible for a thief to know the code to deactivate an immobiliser, and bypass it. The batteries in the majority of key fobs can be easily removed by removing it which means that a burglar could use a simple tool to remove the immobiliser's internal circuit board and replace it with the blank. Then, they will be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser communicates with vehicle's engine ECU (Engine Control Unit) via a discrete quiet CAN data circuit that is unnoticeable with diagnostic tools, such as the ones employed by high-tech thieves. It does not have a traditional keyfob with LED indicator, so it's inaccessible.

You may have to turn off Autowatch's Ghost 2 automatic protection at certain times like valet parking or a service. Ghost CAN immobilisers come with a feature called 'Service Mode that you can activate by a simple push of a phone button. The car is still operational however, the maximum speed is restricted to 36 mph.

Contact us today to set up an appointment to see our workshop. A member of the team will run through an in-depth explanation of the system's operation and will provide you with owner's manuals, installation certificate, Ghost 2 emergency card and security assurance.

Simple process to change the PIN code

Ghost is a next generation device that secures your vehicle without cutting wires or putting in aftermarket key fobs. It is directly connected to the vehicles CAN data network and a personalised PIN code is programmed into it by pressing buttons on your steering wheel and the dash. The system stops engine start and can't be bypassed as no RF signals are emitted from the device. This makes it impossible to be detected by sophisticated RF scanning and code grabbing technologies employed by modern thieves.

The PIN code is able to be changed to lock out previous drivers or even include an override number if you forget the sequence. When installing the installer will show how much is a ghost immobiliser to accomplish this. The system also has the valet mode feature that can be used to temporarily disable the pin input sequence to allow your mechanic or garage can service the car without having to know the pin code. This is a great choice for those who don't wish their pin sequence to be disclosed, but want to leave their car with valet parking or service.

Unlike Thatcham products which require additional key fobs to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered via the smartphone application. No extra LED indicators are used, and your vehicle will be protected without any possibility of being disabled.

Tested for every vehicle

A ghost immobiliser, unlike key fobs which require pressing buttons, is discreetly placed under the steering wheel or dash. It is not obvious that it's there. The device is connected to the CAN network in your vehicle and a PIN code can be programmed by using the buttons on your vehicle. The system will then stop the engine from starting until this code has been entered prior to. This means that thieves cannot duplicate the keys on your car or access the OBD port to gain access to your vehicle.

Ghost can be installed in all vehicles, including electric cars, motorhomes, vans and bikes. Ghost is also extremely flexible and can be set to deactivate in various situations. For example, it can be programmed to go into Valet mode when the vehicle is taken to a valet park or servicing company. This means that your car can be operated within a pre-determined 30mph speed limit, and the ghost immobiliser will activate itself when it returns to your home.

Another fantastic feature is that the device can be reset to your personal PIN code at any time. This is beneficial when you forget the code or the device becomes inoperable which means it's just as good as new.

It's also important to note that the device is inaccessible to those who aren't familiar with it. It works by running through the buttons that are already on the dashboard of your car and on the steering wheel and utilizes the information they send to recognise the button that was activated. This makes it a secure and reliable security system that cannot be manipulated by RF scanning, jamming, or door lock pick set.